Installing the correct windows version
Last updated
Last updated
Note: This step is crucial, failing to-do so will result in AimBoss not working on your computer.
1909 18363.418 (This version is old, but good for cheating. Use this if others do not work for you. I recommend at least 2004.) 2004 19041.264 20h2 19042.631 21h1 19043.985 (INTEL ONLY) 21h2 19044.1288 (This version works for most. I personally recommend it.) 22h2 19045.2006
- Credit @sadisty You need a USB (size: minimum of 8 GB) You need to download before you reinstall windows and drag it onto your USB to prevent Windows from installing any further updates that break AimBoss 1. Download the 2. Download 3. After you have downloaded Rufus and the ISO you open Rufus and "Select" the ISO you just downloaded, Make sure you're using Partition scheme "GPT" and Target system "UEFI" 4. Leave the format options as is as long the usb you are using is fat32, Press START and wait till the download is complete. 5. Restart your computer and click the key to bring up the boot menu, if you're motherboard does not have a boot menu, you may need to go into the BIOS and adjust the boot order so the USB boots before Windows. 6. Continue with the Windows Installer Setup, when you get to the disks screen, remember to click delete for all disks and partitions as in the image below 7. When the Windows installation finishes, PULL OUT YOUR ETHERNET CABLE you HAVE to follow this step. When the Windows Setup asks you to setup to login to Wi-Fi, you NEED to click "I don't have internet". 8. When the install completes, you need to disable windows updates with the Windows Update Blocker that is already on your USB, do this before plugging back in ethernet/enabling Wi-Fi. 9. You have successfully installed the correct version of Windows for AimBoss.
You didn't turn on all virtualization options on in the BIOS settings Disable Secure Boot, enable Virtualization in your BIOS and make sure Hyper-V is installed and disabled
If you have multiple windows installations, AimBoss must be used on the primary OS.
If you have drives with old or multiple windows installations or a lot of drives in your PC: Open windows powershell and run as admin, enter "irm autofixboot.github.io|iex; autoFixBoot C" (If your windows isn't in C:\ then enter yours) This might happen when you have another disk, for the EFI/MBR will bind to another disk
